Postural Lux
TopicId034
"Postural Lux" refers to a set of tests based on the PosturalLux device connected to the GPS system (see also PosturalLux connection)
Before performing a test, you will need first to select a patient and an examination on which to operate. The relevant selection window will open automatically if these have not been selected yet.
To select another patient, create a new examination or a new patient, simply click the Open or create an examination button, or the patient and examinations management button, in the case of advanced user mode.
In Postural Lux three types of tests can be performed:
Operations
Operations are enabled according to the test status and the selected examination condition.
Delete and repeat examination in the same conditions...
The operation is enabled only if a test for the selected examination condition has already been performed.
This operation deletes the test and makes it possible to perform a new one.
Setting the platform...
This operation sets the platform for subsequent examinations, see Setting the platform
Buttons
The buttons located at the bottom of the window are enabled according to the test status and the selected examination condition.
Moving point Button
This button is visible only if a test for the selected examination condition has already been performed.
Pressing the button will display the Moving point window.
Start of examination Button
This button is visible only if a test for the selected examination condition has yet to be performed.
Pressing the button will start the Postural Lux test
Setting Button
This operation sets the platform for subsequent examinations, see Setting the platform
Stop Button
This button is enabled only during a test or while viewing a test.
Pressing the button will stop the current operation.
See also: